Cemented carbide

WC10CO-4Cr

WOCO identifies this item as WC10CO-4Cr, model / grade WC10CO-4Cr. The source size is Particle size pending technical verification.

Specifications & website prices

Specification	Original website price	MOQ
Particle size pending technical verification	￥320.00 /千克Original page #legacy-990 ↗	100 千克

Each price retains the specification, currency and unit of its source listing. Confirm current availability and delivery with WOCO.

Conflicting particle-size information is withheld pending technical verification.

Product overview ↓

Product overview

WC-10Co-4Cr · Product description & applications

Model-level information transcribed from the WOCO product overview. Listed applications are examples; suitability and coating qualification depend on your process. Reference grades are separate from the priced specifications above.

Maximum operating temperature 500℃;
Hard and dense coating, abrasive wear, corrosion wear, erosion wear;
Instead of hard chromium plating;
CoCr bond has higher corrosion resistance and wear resistance than Co bond phase, which is suitable for (moisture) wet corrosion environment.
Mainly used in aircraft landing gear, gate valve and ball valve, paper rod, hydraulic cylinder, compressor rod, metallurgical rolling series, mechanical parts etc.

Grade specifications from the product overview

Grade	Particle size	T.C %	Co %	Cr %	Fe %	O %	Process	Apparent density (g/cm³)	Hall flowability (s/50g)
FB109-2	20–53 µm	5.0-6.0	9.0-10.5	3.0-4.5	≤1.0	≤0.5	Sintered & Crushed	≥4 g/cm³	≤25 s/50g
FB110-5	20–45 µm	5.0-6.0	9.0-10.5	3.0-4.5	≤1.0	≤0.5	Sintered & Crushed	≥4 g/cm³	≤25 s/50g
FB111-3	15–45 µm	5.0-6.0	9.0-10.5	3.0-4.5	≤1.0	≤0.5	Sintered & Crushed	≥4 g/cm³	≤25 s/50g
FA113-2	20–53 µm	5.0-6.0	9.0-10.5	3.0-4.5	≤0.15	≤0.5	Agglomerated & Sintered	≥4 g/cm³	≤18 s/50g
FA114-5	20–45 µm	5.0-6.0	9.0-10.5	3.0-4.5	≤0.15	≤0.5	Agglomerated & Sintered	≥4 g/cm³	≤18 s/50g
FA115-3	15–45 µm	5.0-6.0	9.0-10.5	3.0-4.5	≤0.15	≤0.5	Agglomerated & Sintered	≥4 g/cm³	≤18 s/50g
FA116-6	11–45 µm	5.0-6.0	9.0-10.5	3.0-4.5	≤0.15	≤0.5	Agglomerated & Sintered	≥4 g/cm³	≤18 s/50g
FA117-7	10–38 µm	5.0-6.0	9.0-10.5	3.0-4.5	≤0.15	≤0.5	Agglomerated & Sintered	≥4 g/cm³	≤18 s/50g
FA118-8	10–30 µm	5.0-6.0	9.0-10.5	3.0-4.5	≤0.15	≤0.5	Agglomerated & Sintered	≥4 g/cm³	≤18 s/50g

HVOF process reference & reported coating results

The following values belong to the stated process setup in the product overview. They are starting references, not a guarantee for other equipment, substrates, grades or production runs.

Reference process conditions

Powder	WC-10Co-4Cr
Process type	Agglomerated & Sintered
Particle size	45-15 µm
Spraying gun	JP5000
Gun barrel	6 inch
Kerosene	24 L/h
Oxygen	944 L/min
Carrier gas	7.5 L/min
Powder feed rate	70-80 g/min
Spraying distance	340-380 mm

Coating results in the overview

Hardness	1150-1400 HV0.3
Bonding strength	＞70 MPa
Deposition efficiency	45-55 %
Porosity	＜1 %

View the original product overview ↗

Technical documents

Batch reports apply to the identified batch. Ask WOCO for documents relating to your order.

PDF

WC-10Co-4Cr product overview

Download ↓

Product images & original specifications

Product Name: WC10CO-4Cr
Category: 热喷涂材料
Product Size: Particle size pending technical verification
MOQ: 100千克

WC10CO-4Cr — Product Image — Product Image

Available specifications & supply reference

Original listing information is preserved below. Stock, delivery and freight are subject to current confirmation.

These are dated supplier listings. Their original prices and validity periods are shown for reference; ask WOCO for a current quotation.

Specification	Packaging	Listing date / validity
Particle size pending technical verification	On request	2017-08-24 · 180days

Original supply details

Origin: 成都
Validity: 180days
Area: 成都
Post date: 2017-08-24

Material selection guides

All technical guides ↗