10UF
10UF thermal spray powder
- Material
- WC,Cr,Co,C
- Sizes
- 13*0.6*20 millimeter
Tungsten-based powders
YF12
YF12 thermal spray powder
WOCO identifies this item as YF12 thermal spray powder, model / grade YF12. The source sizes include Particle size pending technical verification; 75–125 µm; 45–125 µm; 45–106 µm; further sizes are listed in the specification table.
Specifications & website prices
| Specification | Original website price | MOQ |
|---|---|---|
| Particle size pending technical verification | $43.00 /KgOriginal page #legacy-858 ↗ | 500 Kg |
| 75–125 µm | $56.00 /KgOriginal page #legacy-1048 ↗ | 200 Kg |
| 45–125 µm | $53.00 /KgOriginal page #legacy-1064 ↗ | 200 Kg |
| 75–125 µm | $53.00 /KgOriginal page #legacy-1080 ↗ | 200 Kg |
| 45–106 µm | $56.00 /KgOriginal page #legacy-1119 ↗ | 200 Kg |
| 75–125 µm | $50.00 /KgOriginal page #legacy-1126 ↗ | 200 Kg |
| Particle size pending technical verification | ￥420.00 /千克Original page #legacy-1136 ↗ | 200 千克 |
Each price retains the specification, currency and unit of its source listing. Confirm current availability and delivery with WOCO.
Conflicting particle-size information is withheld pending technical verification.
Product overview
WC-12Co · Product description & applications
Model-level information transcribed from the WOCO product overview. Listed applications are examples; suitability and coating qualification depend on your process. Reference grades are separate from the priced specifications above.
- Agglomerated & sintered or sintered & crushed gray/black spherical or near-spherical particles, with good fluidity;
- Maximum operating temperature 500℃;
- High hardness, dense coating, wear-resistant particle wear, fretting wear, adhesive wear, erosion wear
- High fracture toughness
- Mainly used in mechanical parts, oil and gas equipment, metallurgical rolls, pump sealing parts, etc
Grade specifications from the product overview
| Grade | Particle size | T.C % | Co % | Fe % | O % | Process | Apparent density (g/cm³) | Hall flowability (s/50g) |
|---|---|---|---|---|---|---|---|---|
| FB101-1 | 45–105 µm | 5.2-5.9 | 11.5-12.5 | ≤1 | ≤0.3 | Sintered & Crushed | 6.5–7.0 g/cm³ | 9–11 s/50g |
| FB102-2 | 20–53 µm | 5.2-5.9 | 11.5-12.5 | ≤1 | ≤0.3 | Sintered & Crushed | 6.2–6.6 g/cm³ | 10–12 s/50g |
| FB103-3 | 15–45 µm | 5.2-5.9 | 11.5-12.5 | ≤1 | ≤0.3 | Sintered & Crushed | 5.6-6.2 g/cm³ | 11–14 s/50g |
| FB104-4 | 5–25 µm | 5.2-5.9 | 11.5-12.5 | ≤1 | ≤0.3 | Sintered & Crushed | 5.0–5.5 g/cm³ | — |
| FB105-2 | 20–53 µm | 4.9-5.4 | 11.5-12.5 | ≤1 | ≤0.3 | Sintered & Crushed | 6.2–6.6 g/cm³ | 10–12 s/50g |
| FA101-1 | 45–105 µm | 5.2-6.0 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.8-5.4 g/cm³ | 9–12 s/50g |
| FA102-2 | 20–53 µm | 5.2-6.0 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.8-5.2 g/cm³ | 10–13 s/50g |
| FA103-3 | 15–45 µm | 5.2-6.0 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.8-5.2 g/cm³ | 10–14 s/50g |
| FA104-4 | 5–25 µm | 5.2-6.0 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.2-4.8 g/cm³ | — |
| FA105-3D | 15–45 µm | 4.9-5.4 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.7-5.2 g/cm³ | 10–14 s/50g |
| FA106-3 | 15–45 µm | 5.2-6.0 | 11.5-12.5 | ≤0.15 | ≤0.2 | Agglomerated & Sintered | 4.1-4.5 g/cm³ | 10–14 s/50g |
HVOF process reference & reported coating results
The following values belong to the stated process setup in the product overview. They are starting references, not a guarantee for other equipment, substrates, grades or production runs.
Reference process conditions
| Powder | WC-12Co |
|---|---|
| Process type | Agglomerated & Sintered |
| Particle size | 45-15 µm |
| Spraying gun | JP5000 |
| Gun barrel | 6 inch |
| Kerosene | 22.7 L/h |
| Oxygen | 944 L/min |
| Carrier gas | 7.5 L/min |
| Powder feed rate | 70-100 g/min |
| Spraying distance | 350-380 mm |
Coating results in the overview
| Hardness | 1100-1300 HV0.3 |
|---|---|
| Bonding strength | ＞70 MPa |
| Deposition efficiency | 40-50 % |
| Porosity | ＜1 % |
Technical documents
Batch reports apply to the identified batch. Ask WOCO for documents relating to your order.
Product images & original specifications
- Product Name
- WC-12CoWC12Co
- Category
- Thermal spraying
- Product Size
- Particle size pending technical verification75–125 µm45–125 µm45–106 µm
- Grade
- YF12
- MOQ
- 500Kg200Kg200千克
Available specifications & supply reference
Original listing information is preserved below. Stock, delivery and freight are subject to current confirmation.
These are dated supplier listings. Their original prices and validity periods are shown for reference; ask WOCO for a current quotation.
| Specification | Packaging | Listing date / validity |
|---|---|---|
| Particle size pending technical verification | On request | 2017-07-27 · 180days |
| 75–125 µm | On request | 2017-09-18 · 20days |
| 45–125 µm | On request | 2017-09-25 · 20days |
| 75–125 µm | On request | 2017-10-09 · 20days |
| 45–106 µm | On request | 2017-10-25 · 20days |
| 75–125 µm | On request | 2017-10-30 · 20days |
| Particle size pending technical verification | On request | 2017-11-02 · 20天 |
Original supply details
- Origin
- CHINACHENGDUChengdu
- Validity
- 180days20days20天
- Area
- CHINACHENGDUChengdu
- Post date
- 2017-07-272017-09-182017-09-252017-10-092017-10-252017-10-302017-11-02