WC8Co

WOCO identifies this item as WC8Co tungsten carbide composite powder, model / grade WC8Co.

Some source size units are inconsistent with the powder designation. Confirm the required particle size and product form against the original record.

The recorded tolerance field is / MM; confirm its dimension basis and units against the drawing.

The source material field reads: WC,Co，.

Listed manufacturing route: Sintered & crushed.

Application & selection

Tungsten-carbide-based feedstocks are selected by the carbide identity and, where present, the binder chemistry. Powder manufacturing route and particle size are also important when selecting material for a coating process.

Match the specified size distribution to the spray equipment and feeding system. Agglomerated-and-sintered powder and crushed powder should be distinguished when checking morphology, flow and the applicable product data. Coating properties are established with the chosen equipment, substrate and test conditions.

Details to confirm for this product

• Required carbide and binder composition and the named grade.
• Particle-size range, manufacturing route and feeder requirements.
• Spray process, substrate, wear mechanism and qualification tests.

References: Tungsten carbide powder; HVOF thermal spraying. The material-family guidance supports selection; confirm grade-specific acceptance criteria using the applicable technical document.